- Home
- ยป
- Our Products
- »
- Automatic Plant
Automatic Plant
Single Facer Corrugation Machine
Minimum Order Quantity: 1 Piece
Product Brochure
Usage/Application | Paper Corrugating |
Brand/Make | VMPPM |
Capacity | 20 Ton Per Day |
Output Paper Width | 2000mm |
Speed | 100 Meter Per Minute |
Automatic Grade | Automatic |
Frequency | 50Hz |
Voltage | 240V |
Heating Load Kw | 38kW |
SF-280S-1800 Single Facer
Specification:
Working width: Max. 1800mm
Design speed: 100m/min
Normal work speed: 60-80m/min
Working gas pressure: 0.4 to 0.9Mpa
Steam pressure: 0.8 to 1.3Mpa
Temperature requirements: 200 to 260???
Flute type: UV or UVV
Power requirements: 380V, 50Hz
Diameter of corrugated roller: 280mm
Diameter of pressing roller: 284mm
Diameter of gluing roller: 216mm
Diameter of pre-heating roller: 320mm
Machine Introduction:
1. Cardboard transmitting method adopts wind absorption, and keep flute profiles stable under the running condition.
2. Transmission part adopts gimbal transmission, away from vibration source, and make the transmission more steady and reliable, and easy to maintain.
3. Glue unit adopts auto-supply glue circularly, pneumatically reset and has buffering effect.
4. Upper corrugated roller surface are treated by special mesh snicked and chrome plated.
5. Upper-lower corrugated roller are made of high quality 48CrMo alloy steel. Hardness of 48CrMo is HRC58-62
6. Flute profiles: A flute, B flute, E flute (the flute profiles can be made according to client’s requirements)
5 Ply Automatic Plant
Minimum Order Quantity: 1 Unit
Product Brochure
Brand | VMPPM |
Usage/Application | Industrial |
Automation Grade | Automatic |
Capacity | 10 Ton Per Day |
Speed | 100-150 meters/min, 150 Meter Per Minute |
Output Paper Width | 1500-2000 mm, 2000mm |
Color | 2 colo |
I. Technical parameter requirement:
n Model MC100-1800
n Total length About 65 meters (depend on base drawing)
n Design speed 100 m/min
n Working speed 50-90 MPM
n Effective width 1800mm
n Flute: C and B
n Steam pressure and consumption
Pressure 1.0 - 1.2MPConsumption about 2500-3000kg/h
n Air pressure and consumption
n Slitting precision: 1mm
n Cutting length and precision 500 - 9999mm, 1mm
n Total power about +/- 150KW (380V, 50HZ), Working power required: +/- 80KW
n Dimension about 65m×10m×5 m (L×W×H)
III. Test basis paper for production line should meet follow requirements;
n Machine surface temperature: not less than 172
n Basis paper scale B
n Basis paper moisture: 8%-10%
liner: 120 250 g/m2 (N.m/g 8); medium paper: 120 250 g/m2 (N.m/g 5.5);
corrugated paper: 120 - 200 g/m2 (N.m/g 6);
IV. some parts equipped by consumers
n Heating system: one set steam boiler that rate capacity is 4000kg/h, rated pressure 1.25Mpa
n Install outside steam pipe and air return-air drainage duct to correct position.
n Compressored air tube, glue pipe, steam pipe and air return pipe have to be installed at correct position before sellers engineer arrives.
n Water, electricity, gas installation ground work.
n Equipment machine grease, lubrication oil, engine oil.
n Test basis paper, corn(potatoes)starch, caustic soda for industrial use, Borax and other material
n Before installation, make sure steam pressure reach to 10-12KG and keep heating part surface temperature over 170
n Buyer has to install Main Power cables & switches of each machines by themselves. Buyer shall arrange welding machine & rods, metal cutting machine , grinding wheels etc, crane equipments forklift with operator , masonary work with cement sand stone etc if & when required , 6 to 8 persons to assist for installation.
Equipment direction:
Left side;
Right side
II. Electric parts and pneumatic parts brand:
n Electric parts brand: Schneider, Chint, Siemense, CPG, Autonics, Delta, Omron
n Pneumatic parts brand: Zhe jiang CSM
Additional Information:
- Item Code: 84413090
- Production Capacity: 100%
- Delivery Time: 80 days
- Packaging Details: Steel pallet and covered with plastic film.
Hydraulic Shaftless Mill Roll Stand
Minimum Order Quantity: 1 Piece
Product Brochure
Type | Automotive Pulleys |
Usage/Application | Single Grinder Crane |
Material Of Construction | Stainless Steel(SS) |
Capacity | 3 ton |
Number of Grooves | Single Groove |
Pulley Style | Standard |
Power Source | Motorized |
Pulley Web Style | Solid |
Allowed paper reel width | 1000-1800mm |
|
|
Allowed paper reel diameter | Φ400-φ1500mm |
|
|
Allowed paper reel weight | 3000KG each side |
|
|
Air pressure requirement | 0.6-0.9Mpa |
|
|
Main shaft diameter | 242mm |
|
|
Motor of hydraulic station | 3KW x 1 nos |
|
|
Main spare parts, material producing area:
1. Hydraulic station: Tianyuan brand, Zaozhuang city, Hebei Province
2. Electric parts: Schneider, Chint
3. Air switch: Schneider
4. Pneumatic parts: Airtac, Taiwan
5. Arm material: HT200 iron casting
6. Body material: Q235A
Vacuum Tension Control For Automatic Plant
Minimum Order Quantity: 1 Piece
Usage/Application | Industrial |
Automation Grade | Automatic |
Frequency | 50Hz |
Body Material | Iron |
Phase | Single Phase |
Power | 6kw |